Important Note: Incorrect affected dates of manufacture for models 1794334, 1813015, 1813074 and 1908152 existed on this website. These have been corrected. If you visited this recall page on 7/18/2017 or before, please check your models again to see if they are included in the recall.

My Ride 65 Car Seat

2017 My Ride 65 Car Seat Recall

Over the past 60 years, safety has been and will continue to be our priority at Graco. As part of Graco’s continuous process of reviewing the quality of its products, Graco is recalling the harness restraints on select My Ride 65 convertible car seats that were manufactured during the summer of 2014 and sold in the U.S.

In accordance with Federal Motor Vehicle Safety Standard No. 213, the National Highway Traffic Safety Administration (NHTSA) evaluates the restraint system compliance including the individual components of the car seat and the complete car seat in a dynamic crash simulation. During a test of the individual harness restraint component, the webbing on certain My Ride 65 convertible car seats did not meet federal requirements for breaking strength.

Graco is notifying consumers who may be impacted and is providing, free of charge, replacement kits with new harness restraints and installation instructions. While waiting for a replacement kit, consumers may continue to use the My Ride 65 convertible car seats.

Injuries Reported: 0

Number of Units Affected: 25,494

Dates Produced: May 16, 2014 through August 1, 2014

MSRP: $119.00 - $199.00

Is your car seat affected?

This recall includes the following Graco My Ride 65 car seats in the table below:

Graco My Ride TM 65 Model Numbers Affected Manufacturing Date Range AND Webbing Tag Code 2014/06
1794334 7/23/2014 through 7/27/2014
1813015 6/20/2014 through 7/27/2014
1813074 5/16/2014 through 8/1/2014
1853478 7/11/2014 through 7/27/2014
1871689 7/5/2014 through 7/24/2014
1872691 5/26/2014 through 7/27/2014
1877535 7/3/2014 through 7/24/2014
1908152 5/20/2014 through 7/15/2014

Please note that model numbers in the affected manufacturing date range that do not have a webbing tag code of “2014/06” are NOT affected by this recall.

Follow these simple steps to verify if your car seat is included in this recall and order the replacement kit.

1. Check your car seat model number, date of manufacture and webbing tag code:

Look under or on the back of your car seat, locate the white label and note the model number and date of manufacture. Next, identify the tag on the webbing of the harness on the back of the car seat and include that date at the bottom of the tag.

Sample harness webbing tag code date

Installation

Code

Installation

Sample Model Label

Installation

Enter your car seat model number, date of manufacture and webbing tag code to see if it is affected:

Replacement Form

Recall Status

If you have any questions, please contact our consumer services team via the gracobaby.com website at http://www.gracobaby.com/en-US/contactus or at 1-800-345-4109 (Monday through Friday from 8 am to 5 pm ET).